Due to the TTs security system it is necessary to disconnect the battery before the instrument cluster is removed. It can not be reconnected until the cluster has been reinstalled. Failing to take this precaution can lead to the vehicle needing to be towed to an Audi dealer for reprogramming.

Typical Failures

#1 Center Display Failure - Display goes blank or becomes pixilated - Common

#2 Fuel Gauge Failure Only - Gauge fails or reads erratically - Common

#3 Coolant Gauge Failure Only - Gauge fails or reads erratically - Common

Less Common Failures

- Backlighting - This issue is normally a sender problem/wiring and should be diagnosed by a technician - Uncommon

- Shift Indicator - This issue is normally a sender problem/wiring and should be diagnosed by a technician - Uncommon

- Complete Gauge, warning indicator, and display failure - This issue is normally a sender problem/wiring and should be diagnosed by a technician - Uncommon

- Individual Warning Indicator Gauge Failure Only - This issue is normally a sender/wiring problem and should be diagnosed by a technician - Uncommon

- Speedometer Gauge Failure Only - This issue is normally a sender/wiring problem and should be diagnosed by a technician - Uncommon unless tampering has occurred

- Tachometer Gauge Failure Only - This issue is normally a sender/wiring problem and should be diagnosed by a technician - Uncommon unless tampering has occurred

Service Performed

- No programming required when installing

- Center Display is replaced

- Gauge power supplies are rebuilt

- Display power supply is rebuild

- 5 year, unlimited mileage warranty (light bulbs under warranty for 1 year)